D-Link DSL-2870B User Manual page 79

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
In this section, we can to select the QoS Classification option and configure it for
this router.
Rule Status: Enable or disable the QoS rule for this router.
Traffic Class Name: Enter a traffic class name for this router.
Rule Order: Select the rule as last rule.
In this section, we can configure classification criteria for this rule.
Class Interface: Specify incoming packets from which interface for this QoS
classification.
Ether Type: Specify incoming packets which Ethernet type for this QoS
classification, this option includes: IP (0x800), ARP (0x806), IPv6 (0x86DD),
PPPoE_DISC (0x8863), PPPoE_SES (0x8864), 8865 (0x8865) and 8866
(0x8866).
Source MAC Address: Specify source MAC address of incoming packets for this
QoS classification.
Source MAC Mask: Specify source MAC mask of incoming packets for this QoS
classification.
Destination MAC Address: Specify destination MAC address of incoming packets
for this QoS classification.
Destination MAC Mask: Specify destination MAC mask of incoming packets for
this QoS classification.
Source IP Address [/Mask]: Specify source IP address and subnet mask of
incoming packets for this QoS classification, only select IP (0x800) and IPv6
(0x86DD).
Destination IP Address [/Mask]: Specify destination IP address and subnet mask
of incoming packets for this QoS classification, only select IP (0x800) and IPv6
(0x86DD), only select IP (0x800) and IPv6 (0x86DD).
Differentiated Service Code Point (DSCP) Check: Select the DSCP value that will
Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
Page 79