D-Link DSL-2870B User Manual page 37

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
WAN – Dynamic IP Address
Select this option to obtain an IP address automatically from your ISP.
Hostname: Enter the hostname.
MAC Address: Enter the MAC address.
MTU: If you experience connection issues, you may need to change the MTU setting
for optimal performance with your specific ISP.
Auto DNS: Select this option to enable or disable the Auto DNS option
NAT: Select this option to enable or disable the NAT option
Firewall: Select this option enable or disable the firewall for this interface.
Default Route: Select this option enable or disable the default route for this interface.
Enable PPPoE Passthrough: Select this option enable or disable the enable PPPoE
passthrough for this interface.
Enable IPv6 Passthrough: Select this option enable or disable the enable IPv6
passthrough for this interface.
Sevice Category: Select the service category.
WAN – Static IP Address
Select this option to set static IP information provided to you by your ISP.
IP Address: Enter the static IP address assigned to you by your ISP.
Subnet Mask: Enter the subnet mask assigned to you by your ISP.
Gateway Address: Enter the gateway address assigned to you by your ISP.
MTU: If you experience connection issues, you may need to change the MTU setting
for optimal performance with your specific ISP.
NAT: Select this option to enable or disable the NAT option
Firewall: Select this option enable or disable the firewall for this interface.
Default Route: Select this option enable or disable the default route for this interface.
Enable PPPoE Passthrough: Select this option enable or disable the enable PPPoE
passthrough for this interface.
Enable IPv6 Passthrough: Select this option enable or disable the enable IPv6
passthrough for this interface.
Sevice Category: Select the service category.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
Page 37