D-Link DSL-2870B User Manual page 39

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
WAN - PPPoA
In this section, we can configure the following parameters.
Username: Enter the username.
Password: Enter the password
Confirm Password: Enter the confirm password
Service Name: Enter the service name.
AC name: Enter the AC name.
IP Control: Select the IP control.
Static IP Address: Enter the static IP address.
MTU: Enter the MTU
Auto DNS: Select this option to enable or disable the Auto DNS option
NAT: Select this option to enable or disable the NAT option
Firewall: Select this option enable or disable the firewall for this interface.
Default Route: Select this option enable or disable the default route for this
interface.
Enable IPv6 Passthrough: Select this option enable or disable the enable IPv6
passthrough for this interface.
Connect Mode Select: Select the connect mode, options to choose from are
Always- on, Manual and Connect –on demand.
Maximun Idle Time: Enter the maximun Idle time
Sevice Category: Select the service category.
WAN – Bridge
Select this option if your ISP uses Bridge.
Sevice Category: Select the service category.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
Page 39