D-Link DSL-2870B User Manual page 38

D-Link DSL-2870B Dual Band Wireless N750 Gigabit ADSL2+ Modem Router User Manual
WAN – PPPoE
Select this option if your ISP requires you to use a PPPoE connection. This option is
typically used for DSL services. Select PPPoE to obtain an IP address automatically
for your PPPoE connection. Please enter the information accordingly.
Username: Enter the username for your ADSL account.
Password: Enter the password for your ADSL account.
Confirm Password: Enter the confirm password.
Service Name: You can enter a name for your service here, it's the optional.
AC Name: Enter a name of this PPPoE access concentrator, It's the optional.
IP Control: Select the IP control.
Static IP Address: Enter the static IP address.
MTU: If you experience connection issues, you may need to change the MTU setting
for optimal performance with your specific ISP.
Auto DNS: Select this option to enable or disable the Auto DNS option
NAT: Select this option to enable or disable the NAT option
Firewall: Select this option enable or disable the firewall for this interface.
Default Route: Select this option enable or disable the default route for this
interface.
Enable PPPoE Passthrough: Select this option enable or disable the enable PPPoE
passthrough for this interface.
Enable IPv6 Passthrough: Select this option enable or disable the enable IPv6
passthrough for this interface.
Connection Mode Select: Specifies the PPPoE connect mode.
Maximum Idle Time: Enter the maximun Idle time
Sevice Category: Select the service category.
Error! Use the Home tab to apply 标题 1 to the text that you want to appear
here.
Page 38