Connecting The Router; System Requirements; Tcp/Ip Configuration - iBall Baton iB-OR246150N User Manual

Step4:
Install POE Injector
 DC: Insert adapter
 POE: This hole is linked to Secondary port of the Outdoor Router with RJ-45.
 LAN: This hole is linked to LAN side PC/Hub or Router/ADSL modem device with RJ-45
Note: The above image is just for your reference, Colour of POE may vary as per product packaging..

2. Connecting the Router

2.1

System Requirements

 Broadband Internet Access Service (DSL/Cable/Ethernet)
 1 DSL/Cable Modem that has an RJ45 connector (which is not necessary if the Router is
connected directly to the Ethernet.)
 Computer with a working Ethernet Adapter and an Ethernet cable with RJ45 connector
 TCP/IP protocol on each pc
 Web browser, such as Microsoft Internet Explorer, Mozilla Firefox

2.2 TCP/IP Configuration

The default IP address of the iB-OR246150N 150M Wireless-N Outdoor AP Router is 192.168.1.200
and the default Subnet Mask is 255.255.255.0 . These values can be changed as per the requirement.
In this guide, we use all the default values for description.
Connect the local PC to the LAN ports of the Router. The IP address for your PC can be configured in
the following two ways.