Table of Contents
Advertisement
3.
Setup Wizard
①
After you login web page, Click WISP Wizard→click"Scan"→Select"SSID"→
Enter encryption password→Select specified WAN type" PPPOE / DHCP / Static"→click Next
Step
Note:
DHCP: If the device connects to DHCP Server of uplink or WISP, please select this mode.
The device will obtain IP address from uplink DHCP server or WISP automatically.
PPPoE: If WISP offer PPPOE access type, please select this mode. You should fill in both the
User Name and Password that your ISP supplies
Static：If WISP offer Static IP access, please select this mode and enter IP address/Subnet
Mask/Gateway and DNS server IP address
Advertisement
Table of Contents
