Product Records; Product Records; Maintenance - Toro Sand Pro 5040 Service Manual

Product Records and Maintenance
Table of Contents
PRODUCT RECORDS . . . . . . . . . . . . . . . . . . . . . . . . .

MAINTENANCE

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EQUIVALENTS AND CONVERSIONS
Decimal and Millimeter Equivalents
U.S. to Metric Conversions
TORQUE SPECIFICATIONS
Fastener Identification . . . . . . . . . . . . . . . . . . . . . . .

Product Records

Insert a copy of the Operator's Manual and Parts Cata-
log for your Sand Pro or Infield Pro at the end of this
chapter. Additionally, if any optional equipment or ac-
cessories have been installed to your machine, insert
the Installation Instructions, Operator's Manuals and
Parts Catalogs for those options at the end of this chap-
ter.
Maintenance
Maintenance procedures and recommended service in-
tervals for Sand Pro and Infield Pro machines are cov-
ered in the Operator's Manual. Refer to that publication
when performing regular equipment maintenance.
Sand Pro & Infield Pro 3040/5040
1
1
. . . . . . . . . . . 2
. . . . . . . . . . . . 2
. . . . . . . . . . . . . . . . . . . 2
. . . . . . . . . . . . . . . . . . . 3
3
Page 2 - 1
Standard Torque for Dry, Zinc Plated and
Steel Fasteners (Inch Series)
Standard Torque for Dry, Zinc Plated and
Steel Fasteners (Metric Fasteners)
Other Torque Specifications
Conversion Factors . . . . . . . . . . . . . . . . . . . . . . . . .
Product Records and Maintenance
Chapter 2
. . . . . . . . . . . . . . . 4
. . . . . . . . . . 5
. . . . . . . . . . . . . . . . . . 6
6