Table of Contents
Advertisement
Enable or disable Bluetooth
If
Make this device visible to other devices
receive all the Bluetooth connection requests, both from your Bluetooth
device and from others'. Select it with caution.
Select
Devices
devices or a COM port.
Bind a Bluetooth device:
1.
Switch on the Bluetooth device within effective range;
2.
Select
Start-> Settings
tap
Add new
3.
The system starts to search for Bluetooth devices;
4.
After a Bluetooth device has been found, you are prompted to enter
the secret-key. The key can be obtained from the Bluetooth dealer or
specified by you. Once the secret-key is entered, the binding process
is done.
Beam Files
In the file list, tap
1.
2.
After the phone has found the Bluetooth device, tap
Receive a file via Bluetooth:
1.
Make sure you have enabled Wireless Data Exchange, and have
selected
2.
Keep your phone within 10 meters away from the sending device;
When the phone prompts there's an incoming file, tap
1.
receiving. The received file will be saved in \My Documents.
9.3 Lock
Lock the phone automatically after it's been idle for a while. A password is
required every time to activate or switch on your phone.
On the password screen, the following message appears after the eighth
time of incorrect password input:
->
COM
Ports, add new device to search for other Bluetooth
device...;
:
Menu
Make this device visible to other devices
is selected, your phone will
->
Connections
->
Beam
File...;
69
->
Bluetooth
-> Devices,
beam
in Mode;
File...;
Yes
to start
Advertisement
Table of Contents
