Table of Contents
Advertisement
The current frequency, current group and current channel are shown as in
the figure above – "5", "6" and "7".
7.3.4 Fine Tune
You may fine-tune the radio frequency.
Tap "10 Reduce frequencies by 0.1MHz" or "13 Increase frequencies by
0.1MHz".
After tuning, "7 Current channel" shows nothing since the current
frequency is different from the one saved. Press and hold any channel
button to save the frequency into it.
7.3.5 Search a Channel
Tap "11 Search lower-frequency channels" or "12 Search higher-frequency
channels" to start searching until one channel found.
After stop searching tap and hold any channel button to save the new
frequency into it.
7.3.6 Sound
"4 Earphone/Loud speaker"
"8 Mute"
"9 Volume" – level 0~8 (default is 4)
7.3.7 Frequency Setting
Select Menu - > Setting, and then specify a frequency (in KHz).
7.4 Recorder
You can through recorders to record your favorite sound, and can be set up
to record the voice of an Incoming Call Ring, Alarm, and Message Remind.
Tap Start, and then select Programs, tap Recorder.
Long tap a file, then will pop up a menu, Play, as an Incoming Call Ring,
Alarm, and Message Remind.
51
Advertisement
Table of Contents
