Table of Contents
Advertisement
AUTO display starter autostart enabled features.
1. Press and hold Button 5 until the display shows AUTO.
The transmitter will beep three times.
2. Release Button 5.
The LCD panel will display what starter auto start features are enabled.
SPCL Program the pager time of a day clock from the internal Remote Starter clock, the remote starter
sends its time to the pager.
1. Press and hold Button 5 until the display shows SPCL.
The transmitter will beep four times.
2. Release Button 5.
The pager will display the new time.
SSCL Program the remote starter time of a day clock from the pager
1. Press and hold Button 5 until the display shows SPCL.
The transmitter will beep five times.
2. Release Button 5.
The pager will display confirmation that the starter clock is sync.
C St
Auto Start Cold Temperature Activation Mode.
1. Press and hold Button 5 until the display shows C St.
The transmitter will beep 6 times.
2. Release Button 5.
The transmitter will beep once.
The LCD panel will show Auto Start Cold Temperature setting.
3. Press and hold Button 5 until the display shows CON.
4. Release Button 5.
The transmitter will beep once.
The LCD panel will show "ON" indicating that Auto Start Cold Temperature Activation
Mode is enabled.
H St Auto Start Hot Temperature Activation Mode.
1. Press and hold Button 5 until the display shows H St.
The transmitter will beep 7 times.
2. Release Button 5.
The transmitter will beep once.
The LCD panel will show Auto Start Hot Temperature setting.
3. Press and hold Button 5 until the display shows CON.
4. Release Button 5.
The transmitter will beep once.
The LCD panel will show "ON" indicating that Auto Start Hot Temperature Activation
Mode is enabled
A St Auto Start Daily Activation Mode.
1. Press and hold Button 5 until the display shows A St.
The transmitter will beep 8 times.
2. Release Button 5.
The transmitter will beep once.
The LCD panel will show Daily Auto Start time setting.
3. Press and hold Button 5 until the display shows CON.
4. Release Button 5.
The transmitter will beep once.
The LCD panel will show "ON" indicating that Daily Auto Start Activation
Mode is enabled
SND
sound function selects the transmitter's confirmation mode - Tone or Vibration mode.
Set the transmitter confirmation tones ON or OFF:
1. Press and hold Button 5 until the display shows SND.
The transmitter will beep 9 times.
2. Release Button 5.
The transmitter will beep once.
The LCD transmitter will beep 5 times and display "on" if the sounds are enabled or vibrate and
display "off" for the Remote to vibrate.
G777,G27,A777,A20 - Page 5
Hide quick links:
Advertisement
Table of Contents
