Step 3
Align the hole in the handle (4) with the hole in
the base ,screw in a bolt(A),together with a lock
washer(F) and a flat washer(H) into each
predrilled hole.
Tighten by screwdriver until secure.
GST1912L
Owner's Manual
Step 4
Align the hole under the burner (6) with
the hole in the bottom of the base,
Ensure that the burner venturi tube
passes through the hole on the side of
the base .
Screw in a bolt(C)together with a lock
washer(F) and a flat washer(H) into the
predrilled hole in the burner.
Tighten by screwdriver until secure.
Screw the regulator(7) into the burner
tube.
8