Life & Home GST1912L Owner's Manual page 10

Step 5
Align the hole in each top hinge (9) with the
hole in lid.
Screw a bolt(B)together with a heat resistant
washer (E) into the pre-drilled hole,then seal
with a flat washer(I) , a lock washer(G)and a
wing nut(D) .
Tighten by screwdriver until secure.
Step 6
Align the hole in the handle (4) with the hole
in lid.
Screw a bolt(A),together with a lock
washer(F)and a flat washer (H) into each
pre-drilled hole.
Tighten by screwdriver until secure.
GST1912L
Owner's Manual
9