company to repair your steam oven. Steam oven by manufacturers training qualified professionals for repair, please don't disassemble and repair. I nstallation
Only a qualified person in compliance with the instructions provided must install the appliance .the manufacturer declines all responsibility for improper installation, which may harm persons and animals and damage property.
Page 5
In order to fix the oven with cabinet, please open the steam oven door and insert four wood screws into the four hole around frame and fix them. ...
before cooking. This appliance is not intended for use by persons (including children) with reduced physical sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety. ...
Perforated container:Cooking for fresh or refrigerant vegetables, meat and poultry. Non-perforated container:Cooking for preserved fruit、dumplings. Rack:Cooking for foods with small utensils ,Like: steam bun, sweetmeats。 6 Description
o f
f ront
p anel
c ontrols
...
Defrost Disinfecting Clock Child lock Cooking duration Delay time Descaling Water level (not lack of water) Water level (lack of water) Temperature 7、How to use your oven 7.1 Clock Setting When the first use, DSP1 shows a flashing“0:00”. Set the time, turn PT1 to the right and left to increase or decrease the hours. After setting the hour, press it once to set the minutes.
8.2 Steam Functions In standby state, press PT2 boot option, rotate PT2 selected steam function “ ”DSP1 display default time 10 minutes, DSP2 display default steam temperature 100℃. Press PT1, rotate PT1 temperature setting. Then click on the PT1, rotating PT1 set cooking time, set the cooking time, press PT2, cooking began to work.
Different fish have different temperature; you can refer to the following table. 8.5 Cooking for Vegetables (Automatically) Choose steamed vegetables function “ ”,DSP1 display default time 20:00 minutes, DSP2 default steam temperature is 100 ℃ and program A1 shine alternately Press PT1, rotate PT1 set procedures.
The longest working time: 90:00 8.7 Pizza Function (Steam Oven function) Choose pizza function “ ”, DSP1 no display, DSP2 display 200 g Press PT1, rotate PT1 for weight setting, set the weight, press PT2, cooking began to work; pizza function icon “ ”...
minutes, DSP2 default steam temperature is 100 ℃ and program r1 shine alternately Press PT1, rotate PT1 set procedures. Then click on the PT1, rotating PT1 set cooking time, set the cooking time, press PT2, cooking began to work. , steam Disinfecting function icon“...
10.3 Standby mode Choose any a function, In all set up after the parameters, There is no confirmation according to PT2 thing before (Cooking did not open) , Long according to PT2 button to enter standby state. Choose any a function, Press PT2 key, Cooking program open, Long according to PT2 key until screen DSP1 scintillation display PUMP, we can rotate PT2 key to choose again function.
Page 15
until DSP1, appear on the DSP2 OFF bLOC. Rotary PT1 can choose child lock activation function ON bLOC and closing OFF bLOC, when DSP1, DSP2 display ON bLOC, press the PT2 confirm activation child lock, DSP4 display icon “ ”.
them ;Stainless steel could get stained .If these stains are difficult to remove, use special products available on the market. After cleaning, it is advisable to rinse thoroughly and dry. The inside of the oven should preferably be cleaned immediately after use, when it is still warm, with hot water and soap;...
Page 17
Err
P UMP
Flow
m eter
s ucking
w ater
t he
l atter
t o
g et
a
s mall
a mount
o f
w ater
16、Trouble shooting Warning: Maintenance should be done by a professional mechanic.
Need help?
Do you have a question about the SG1035ES and is the answer not in the manual?
Questions and answers