Connecting A Bar Code Reader; Connecting The Bar Code Reader - Casio IT-3000 Series User Manual

Connecting a Bar Code Reader

(IT-3000M53E/IT-3000M54E2 only)
Connect the bar code reader to the RS-232C interface connector (8-Pin) on the
Handheld Printer Terminal.
There are two models of optional bar code readers available; pen bar code reader DT-
9650BCR and touch bar code reader DT-9656BCR.

Connecting the bar code reader

1. Check that the power is off. If the power is on, always make sure to turn it off by
pressing the power key. Open the cover of the RS-232C interface connector. (
2. Insert the plug of the bar code reader
into the connector as shown in the
illustration.(
Disconnecting bar code reader
Turn off the power of the Handheld Printer Terminal. Unplug the bar code reader.
IT-3000_E_P53_81.p65
)
2
71
)
1
1
2
E-71
05.4.14, 11:04 AM