Configuring Dip Switch Settings - Casio IT-3000 Series User Manual

Configuring DIP Switch Settings

Removing the bottom cover of the Bridge Satellite Cradle exposes the DIP switches.
You can change the ON/OFF settings of the DIP switches to set the configuration. Only
set the DIP switches after first switching OFF the power.
1 2 3 4 5 6 7 8
Important!
Note that other DIP settings are used for testing and inspection purposes. Because
of this, you should never use any DIP settings other than those described above.
IT-3000_E_P53_81.p65
Not used (Always off)
Not used (Always off)
Host Computer Interface
Setting
RS-232C
USB
Daisy Chain
Setting
Intermediate Unit
Daisy Chain Disabled/Termination
Connection Type
Setting
Host Computer
Daisy Chain
Bridge Satellite Cradle Data Rate
Setting
115,200bps
*Initial factory setting
57
6
OFF
ON
*
5
OFF
ON
*
3 4
OFF OFF
*
ON OFF
1 2
ON OFF
*
E-57
2005.3.29, 5:56 PM