Attaching The Neck Strap - Casio IT-3000 Series User Manual

Attaching the Neck Strap

A neck strap can be attached to the Handheld Printer Terminal to keep it from being
dropped while being carried. The stylus holder provided can also be attached.
Adjust length here
Mounting
hooks
Attach the neck strap following the
procedure described below.
Attachment Procedure
Pull out the neck strap mounting hooks on
the bottom of the Handheld Printer
Terminal using the stylus (pen), pull back
the locking bars of the neck strap
mounting hooks and insert the hooks into
the mounting brackets on the Handheld
Printer Terminal.
Removal Procedure
Pull back the locking bars of the neck strap
mounting hooks to release the hooks from
the mounting brackets on the Handheld
Printer Terminal. After removing the
mounting hooks, push down the neck strap
mounting hooks on the Handheld Printer
Terminal.
E-30
IT-3000_E_P15_31.p65
Neck strap
* The illustration shows the IT-3000M53E
30
Stylus holder
05.4.14, 11:02 AM