Table of Contents
Advertisement
Connecting a Bar Code Reader
(IT-3000M53E/IT-3000M54E2 only)
Connect a bar code reader to the RS-232C interface connector (8-Pin) on the Handheld
Printer Terminal.
Connecting the bar code reader
1. Check that the power is off. If the power is on, always make sure to turn it off by
pressing the power key. Open the cover of the RS-232C interface connector. (
2. Insert the plug of the bar code reader
into the connector as shown in the
illustration.(
Disconnecting bar code reader
Turn off the power of the Handheld Printer Terminal. Unplug the bar code reader.
)
2
)
1
1
2
E-73
Advertisement
Table of Contents
