4Ch Dvr Rear Panel - Konig SAS-DVRSET35 Manual

2�2 4CH DVR Rear Panel
Item Physical port
1 Video input
2 Video output
3 Audio Input
4 Audio Output
5 USB Port
6 USB Port
7 VGA Port
8 RS-485/Sensor/Alarm
9 Power Port
10 Ethernet: Port
11 Power Switch
RS485/Sensor/Alarm port functions:
Alarm input: Connect [-] port of your sensor to G (GND) pin, and [+] port to channel input
according to the alarm device you purchased.
Alarm output: Connect to the two ports marked with "out"
PTZ Port: Connect your camera to RS-485A and RS485B accordingly.
(other models may vary slightly)
Connection method
Connect video input device (BNC
interface)
Connect monitor output(BNC interface)
4CH audio input (RCA interface)
Audio output (RCA interface)
Connect USB device (Flash Drive, Hard Drive and
Recorder etc)
Connect USB mouse
Connect to VGA monitor, such as PC monitor
(Optional)
RS485/Sensor/Alarm interface (see pin outs below)
Connect power supply - DC 12 V 3 A
Connect LAN, Ethernet (RJ45 interface)
Turn Power on and off
8
ENGLISH