Konig SAS-DVRSET35 Manual page 14

5�2 Main Menu
Picture 5-2
5�2�1 Display
5�2�1�1 Live mode
Go to <Main menuDisplayLive> option and enter into the <Display> setting interface
shown as Picture 5-3.
Picture 5-3
Picture 5-4
Explanation:
1. The modifications will be available after clicking [APPLY] button on the bottom of the sub-
menu windows and being prompted to save and then clicking [ok] button.
2. If you want to cancel the modification, click [Exit] button to exit the menu.
3. When clicking [DEFAULT] button, all system default values will be reset to default value.
4. System default value indicates the value pre-set at the factory.
On <Live> mode, click [Menu] button on the front
panel or Remote controller to enter into Main
menu interface shown as Picture 5-2. And also
you can click [ ] icon to enter the main menu
screen. In Main Menu mode, you can control device
management settings, such as Display, Record,
Network, Search, Device, System and Advanced
setting etc.
¾ Channel: allow you setup the channel you
desired.
¾ Name: allow you setup the channel name, and
system support up to eight characters or four
Chinese characters.
¾ Position: allow you setup the display position of
each channel.
¾ Color: Click [Setup] option to enter into the
[Color setup] interface shown as Picture 5-4.
¾ Covert: allow you enable [Live] surveillance
screen
¾ Show time: allow you enable system time
appear in the <Live> screen.
¾ Record time: When set to "Enable", you are
allowed to record system time into the record
history.
¾ Copy: allow you copy all data of one channel to
any other one
Left picture 5-4 is the Color setup Menu where you
can adjust image brightness, saturation, contrast
and hue parameters of each channel.
14
ENGLISH