Network Settings - NEC M350X User Manual

NETWORK SETTINGS

• SETTINGS
WIRED or WIRELESS
SETTING
APPLY
DHCP ON
DHCP OFF
IP ADDRESS
SUBNET MASK
GATEWAY
AUTO DNS ON
AUTO DNS OFF
Setting for WIRED LAN
ENABLE
DISABLE
Setting for WIRELESS LAN (with the optional USB Wireless LAN Unit equipped)
EASY CONNECTION
CHANNEL
PROFILE 1/PROFILE 2
SSID
SITE SURVEY
Downloaded From projector-manual.com NEC Manuals
Set for wired LAN or for wireless LAN.
Apply your settings to wired LAN or wireless LAN.
Automatically assign IP address, subnet mask, and gateway to the projector from your
DHCP server.
Set IP address, subnet mask, and gateway to the projector assigned by your network
administrator.
Set your IP address of the network connected to the projector.
Set your subnet mask number of the network connected to the projector.
Set the default gateway of the network connected to the projector.
DHCP server will automatically assign IP address of DNS server connected to the
projector.
Set your IP address of DNS server connected to the projector.
Turn on wired LAN connection
Turn off wired LAN connection
Execute a wireless LAN using EASY CONNECTION.
Select a channel. Available channels vary depending on the country and region. When
you select [INFRASTRUCTURE], make sure that the projector and your access point
are on the same channel; when you select [AD HOC], make sure that the projector and
your computer are on the same channel.
Two settings can be set for wireless LAN connection. Select PROFILE 1 or PROFILE
2.
Enter an identifier (SSID) for wireless LAN. Communication can be done only with
equipment whose SSID matches SSID for your wireless LAN.
Displays a list of available SSIDs for wireless LAN on site. Select an SSID which you
can access.
43
3. Convenient Features