NEC M350X User Manual page 61

3. Select the projector you wish to connect, and click "Connect".
The target selection window will be displayed.
4. Place a check mark for projectors to be connected, and then click "Connect".
• When one or more projectors are displayed, from the menu on the projector, select [INFO.] → [WIRELESS LAN]
→ [IP ADDRESS].
When connecting with the projector is establised, you can operate the control window to control the projector. (→
page 39)
NOTE:
• When [POWER-SAVING] is selected for [STANDBY MODE] from the menu, the projector that is turned off will not be displayed
in the select window for destination
Downloaded From projector-manual.com NEC Manuals
51
3. Convenient Features