NEC M350X User Manual page 54

NETWORK TYPE
SECURITY TYPE
INDEX
KEY
• NAME
PROJECTOR NAME
HOST NAME
DOMAIN NAME
Downloaded From projector-manual.com NEC Manuals
Select communication method when using wireless LAN.
INFRASTRUCTURE: Select this option when communicating with one or more equip-
ment connected to the wireless LAN network via a wireless access point.
AD HOC: Select this option when using the wireless LAN to directly communicate with
a computer in peer-to-peer mode.
Turn on or off the encryption mode for secure transmission. When turn on the encryp-
tion mode, set WEP key or encrypted key.
DISABLE Will not turn on the encryption feature. Your communications
may be monitored by someone.
WEP 64 bit Uses 64-bit datalength for secure transmission.
WEP 128 bit Uses 128-bit datalength for secure transmission.This option will
increase privacy and security when compared to use of 64-bit
datalength encryption.
WPA PSK-TKIP/ These options provide stronger security than WEP.
WPA PSK-AES/
WPA2 PSK-TKIP/
WPA2 PSK-AES
NOTE:
• The WEP settings must be the same as communication devices such as PC or access point in
your wireless network.
• When you use WEP, your image transmission speed will slow down.
• [WPA PSK-TKIP], [WPA PSK-AES], [WPA2 PSK-TKIP] and [WPA2 PSK-AES] are not available
when [AD HOC] is selected from [NETWORK TYPE].
Select encryption key when selecting [WEP 64 bit] or [WEP 128 bit] in [SECURITY
TYPE].
When selecting [WEP 64 bit] or [WEP 128 bit] in [SECURITY TYPE]:
Enter WEP key.
Select Characters (ASCII)
WEP 64 bit Up to 5 characters
WEP 128 bit Up to 13 characters
When selecting [WPA PSK-TKIP], [WPA PSK-AES], [WPA2 PSK-TKIP] or [WPA2
PSK-AES]:
Enter encryption key. Key length must be 8 or greater and 63 or less.
Enter a name for your projector so that your computer can identify the projector. A
projector name must be 16 characters or less.
TIP: Projector name will not be affected even when [RESET] is done from the menu.
Enter the hostname of the network connected to the projector. A host name must be
15 or less.
Enter the domain name of the network connected to the projector. A domain name
must be 60 characters or less.
44
3. Convenient Features
Hexadecimal digit (HEX)
Up to 10 characters
Up to 26 characters