NEC M350X User Manual page 97

5. Using On-Screen Menu
Hints on How to Set Up LAN Connection
To set up the projector for a LAN connection:
Access the HTTP server function to display the web browser (→ page 40) and select [NETWORK SETTINGS] →
[SETTINGS] → [WIRELESS LAN] → [PROFILE 1] or [PROFILE 2].
Two settings can be set for the USB Wireless LAN Unit.
Next select [SETTINGS] for your selected profile, and set [ENABLE] or [DISABLE] for [DHCP], [IP ADDRESS],
[SUBNET MASK], and [GATEWAY]. Last click [SAVE]. To reflect changes, click the [SETTING] tab and then click
[APPLY]. (→ page 43)
To recall LAN settings stored in the profile number:
Use [PROFILE 1] or [PROFILE 2] set on the HTTP server, from the projector' menu, select [SETUP] → [WIRELESS
LAN] → [PROFILE] → [PROFILE 1] or [PROFILE 2]. Last select [OK] and press the ENTER button. (→ page 86)
To connect a DHCP server:
From the projector menu, select [SETUP] → [WIRED LAN] → [SETTINGS] → [DHCP] → [ON] and press the ENTER
button. To specify IP address without using the DHCP server, use the HTTP server function. (→ page 40)
To set only for wireless LAN (NETWORK TYPE and WEP/WPA):
Access the HTTP server function to display the web browser (→ page 40) and select [NETWORK SETTINGS] →
[SETTINGS] → [WIRELESS LAN] → [PROFILE 1] or [PROFILE 2].
Make necessary settings for [SETTINGS] and click [SAVE].
From the projector menu, select [SETUP] → [WIRELESS LAN] → [PROFILE] → [PROFILE 1] or [PROFILE 2].
To select an SSID:
Access the HTTP server function to display the web browser (→ page 40) and select [NETWORK SETTINGS] →
[SETTINGS] → [WIRELESS LAN] → [CONNECTION] → [SITE SURVEY] and select the ID.
If you do not use [SITE SURVEY], type the SSID in [CONNECTION] and select [INFRASTRUCTURE] or [AD HOC].
(→ page 43)
To receive lamp replacement time or error messages via e-mail:
Access the HTTP server function to display the web browser (→ page 40) and select [NETWORK SETTINGS] →
[ALERT MAIL], and set [SENDER'S ADDRESS], [SMTP SERVER NAME], and [RECIPIENT'S ADDRESS]. Last,
click [SAVE]. (→ page 45)
To execute [EASY CONNECTION] using Image Express Utility Lite:
The [EASY CONNECTION] is a mode that can abbreviate the troublesome LAN settings when using the Image
Express Utility Lite and connecting the PC and projector via a wireless LAN.
The Image Express Utility Lite is contained on the supplied NEC Projector CD-ROM.
To use [EASY CONNECTION], access the HTTP server function to display the web browser (→ page 40) and select
[NETWORK SETTINGS] → [SETTINGS] → [WIRELESS LAN] → [EASY CONNECTION]. Next select [SETTINGS]
→ [CHANNEL]. Last click [SAVE].
From the projector menu, select [SETUP] → [WIRELESS LAN] → [PROFILE] → [EASY CONNECTION].
NOTE: The [EASY CONNECTION] function is available on Windows 7, Windows Vista or Windows XP SP3.
87
Downloaded From projector-manual.com NEC Manuals