D-Link DFL-260E Reference Manual page 65

2.2.57. selftest
selftest -ping [-interfaces=<Interface>]
Run a ping test over the interfaces.
selftest -throughput [-interfaces=<Interface>]
Run a throughput test over the interfaces.
selftest -traffic [-interfaces=<Interface>]
Run a traffic test over the interfaces.
selftest -cryptoaccel
Verify the correct functioning of the accelerator cards.
selftest -burnin [-hours[=<Integer>]] [-minutes[=<Integer>]]
Run burn-in tests for a set of sub tests. If no sub tests are specified the following are included: -
memory, -ping, -traffic, -cryptoaccel.
selftest -abort
Abort a running self test.
selftest
Show the status of a running test.
Options
-abort
-burnin
-cryptoaccel
-hours[=<Integer>]
-interfaces=<Interface>
-mac
-media
-memory
-minutes[=<Integer>]
-num=<Integer>
-ping
-size=<Integer>
-throughput
[-memory] [-media] [-ping] [-throughput] [-traffic]
[-cryptoaccel]
Abort a running self test.
Run burn-in tests for a selected set of sub tests.
Verify the correct functioning of available crypto accelerator
cards.
Test duration in hours. (Default: 48)
Ethernet interface(s).
Check if there are MAC address collisions on the interfaces.
Check the sanity of the disk drive.
Check the sanity of the RAM.
Test duration in minutes. (Default: 0)
Number of times to execute the test. (Default: 1)
Run a ping test over the interfaces.
Size of media space to utilize in the test. Set in MB. (Default:
1)
Run a throughput test over the interfaces. This will show the
65
Chapter 2. Command Reference