Routemon; Routes - D-Link DFL-260E Reference Manual

2.2.55. routes

2.2.54. routemon

List the currently monitored interfaces and gateways.
Description
List the currently monitored interfaces and/or gateways.
Usage
routemon
2.2.55. routes
Display routing lists.
Description
Display information about the routing table(s):
- Contents of a (named) routing table.
- The list of routing tables, along with a total count of route entries in each table, as well as how
many of the entries are single-host routes.
Note that "core" routes for interface IP addresses are not normally shown. Use the -all switch to
show core routes also.
Use the -switched switch to show only switched routes.
Explanation of Flags field of the routing tables:
O Learned via OSPF
X
Route is Disabled
M Route is Monitored
A Published via Proxy ARP
D Dynamic (from e.g. DHCP relay, IPsec, L2TP/PPP servers, etc.)
H HA synced from cluster peer
Usage
routes [-all] [<table name>] [-switched] [-flushl3cache] [-num=<n>]
[-nonhost] [-tables] [-lookup=<ip address>] [-verbose]
62
Chapter 2. Command Reference