D-Link DFL-260E Reference Manual page 195

3.55.20. SSLVPNInterfaceSettings
3.55.20. SSLVPNInterfaceSettings
Description
SSL VPN interface settings.
Properties
SSLVPNBeforeRules
ProxyARPAllInterfaces
ProxyARPInterfaces
3.55.21. StateSettings
Description
Parameters for the state engine in the system.
Properties
ConnReplace
LogOpenFails
LogReverseOpens
LogStateViolations
LogConnections
LogConnectionUsage
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
Pass SSL VPN connections sent to the security gateway directly
to the SSL VPN engine without consulting the ruleset. (Default:
Yes)
Always select all interfaces, including new ones, for publishing
routes via Proxy ARP. (Default: No)
Specifies the interfaces on which the security gateway should
publish routes via Proxy ARP. (Optional)
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
What to do when the connection table is full. (Default: Re-
placeLog)
Log packets that are neither part of open connections nor valid
new connections. (Default: Yes)
Log reverse connection attempts through an established con-
nection. (Default: Yes)
Log packets that violate stateful tracking rules; for instance,
TCP connect sequences. (Default: Yes)
Log connections opening and closing. (Default: Log)
Log for every packet that passes through a connection.
(Default: No)
Chapter 3. Configuration Reference
195