D-Link DFL-260E Reference Manual page 205

3.60. ZoneDefenseBlock
3.60. ZoneDefenseBlock
Description
Manually configured blocks are used to block a host/network on the switches either by default or
based on schedule.
Properties
Addresses
Protocol
Port
Schedule
Comments
Specifies the addresses to block.
All, TCP, UDP or ICMP. (Default: All)
Specifies which UDP or TCP port to use. (Default: 0)
Specifies the schedule when the given addresses should be blocked. (Optional)
Text describing the current object. (Optional)
Note
If no Index is specified when creating an instance of this type, the object will be
placed last in the list and the Index will be equal to the length of the list.
Chapter 3. Configuration Reference
205