Routingsettings - D-Link DFL-260E Reference Manual

3.55.18. RoutingSettings

SNMPRequestLimit
SNMPSysContact
SNMPSysName
SNMPSysLocation
SNMPIfDescription
SNMPIfAlias
LocalConsoleIdleTimeout
WebUIIdleTimeout
3.55.18. RoutingSettings
Description
Configure the routing capabilities of the system.
Properties
RouteFailOver_IfacePollInterval
RouteFailOver_ARPPollInterval
RouteFailOver_PingPollInterval
RouteFailOver_GraceTime
RouteFailOver_ConsecFails
RouteFailOver_ConsecSuccess
Transp_CAMToL3CDestLearnin
g
Transp_DecrementTTL
Note
This object type does not have an identifier and is identified by the name of the type
only. There can only be one instance of this type.
configured IP Rules. (Default: Yes)
Maximum number of SNMP packets that will be processed
each second. (Default: 100)
The contact person for this managed node. (Default: N/A)
The name for this managed node. (Default: N/A)
The physical location of this node. (Default: N/A)
What to display in the SNMP MIB-II ifDescr variables.
(Default: Name)
What to display in the SNMP ifMIB ifAlias variables.
(Default: Hardware)
Number of seconds of inactivity until the local console user is
automatically logged out. (Default: 900)
Number of seconds of inactivity until the HTTP(S) session is
closed. (Default: 900)
Time (ms) between polling of interface failure. (Default: 500)
Time (ms) between ARP-lookup of gateways. May be over-
ridden for each route. (Default: 1000)
Time (ms) between PING'ing of gateways. (Default: 1000)
Time (s) between startup/reconfigure and monitoring start.
(Default: 30)
Number of consecutive failures before route is marked as un-
available. (Default: 5)
Number of consecutive success before route is marked as
available. (Default: 5)
Do L3 Cache learning based on destination IPs and MACs in
combination with CAM table contents. (Default: Yes)
Decrement TTL on packets forwarded between transparent
interfaces. (Default: No)
193
Chapter 3. Configuration Reference