Table of Contents
Advertisement
5. Place the broil burner on the broil burner orifice hood and insert
the broil burner ceramic igniter in the hole in the rear of the
oven.
6. Position the broil burner against the top of the oven and attach
it with 2 screws.
7. Replace storage drawer, warming drawer or premium storage
drawer. See the "Storage Drawer" or "Warming Drawer or
Premium Storage Drawer" section.
8. Replace the oven door. See the "Oven Door" section.
9. Replace the oven racks.
W10526975A
Complete Installation (LP Gas to Natural Gas)
1. Refer to the "Make Gas Connection" section for properly
connecting the range to the gas supply.
2. Refer to the "Electronic Ignition System" section for proper
burner ignition, operation, and burner flame adjustments.
IMPORTANT: You may have to adjust the "LO" setting for each
cooktop burner.
Checking for proper cooktop, bake and broil burner flame is
very important. Natural gas flames do not have yellow tips.
3. Refer to "Complete Installation" in the "Installation Instructions"
section of this manual to complete this procedure.
NOTE: Make sure to save the orifices that have just been
replaced in the conversion.
®
/™ ©2012 Whirlpool. All rights reserved.
7/12
Printed in U.S.A.
Hide quick links:
Advertisement
Table of Contents
