Advertisement
PANEL CONTROLS
ALL LEFT AND RIGHT REFERENCES ACCURATE FROM REAR VIEW
INPUTS
Input 1 (Normal): High Sensitivity
Use this input for max pickup output and frequency response .
Input 2 (Normal): Low Sensitivity -6dB
Use this input for hotter pickups.
Input 1 (Vibrato): High Sensitivity
Use this input for max pickup output and frequency response .
Input 2 (Vibrato): Low Sensitivity -6dB
Use this input for hotter pickups.
VOLUME NORMAL
Controls overall gain/volume.The normal inputs and
volume are dry, not processed through the vibrato effect.
VOLUME VIBRATO
Controls overall gain/volume. The vibrato inputs and
volume are processed through the effect.
MASTER
Controls the overall volume of the amplifier.
Power tube saturation begins around 6-7.
TREBLE
Controls high frequency response centered around 2Khz.
MID
Controls mid frequency response centered around 500hz.
BASS
Controls low frequency response centered around 60hz.
(VIEW FROM REAR OF AMPLIFIER)
PRESENCE
Controls the high frequency response of the power amplifier.
This control is effective at frequencies higher than the
treble control.
SPEED
Controls the rate or speed of the selected effect.
The exclusive Magnatone design allows for extremly slow
"choral" settings not attainable from the orginal design.
When the remote pedal is connected, the front panel
control is inactive.
FM/AM SWITCH
Controls whether the effect is exclusive Magnatone pitch
shifting vibrato (FM) or conventional tremolo (AM).
AM
- Amplitude Modulation
FM
- Frequency Modulation
INTENSITY
Controls the amount of modulation effect.
A good balance of effect should be maintained for normal use.
STANDBY SWITCH
Allow the amplifier 1 minute to warm up before engaging.
POWER SWITCH
Turns the amplifier on and off.
Make sure you are plugged into a proper grounded outlet.
Advertisement
