Advertisement
FRONT PANEL
INPUTS
Input 1: High Sensitivity
Use this input for max pickup output and frequency response.
Input 2: Low Sensitivity -6dB
Use this input for hotter pickups.
HI GAIN
Controls the amount of gain in the "Hi Gain" mode as selected by
the front panel switch.
LO GAIN
Controls the amount of gain in the "Lo Gain" mode as selected by
the front panel switch.
GAIN SELECT
Selects between Hi gain or lo gain operation.
MASTER
Controls the overall volume of the amplifier.
Power tube saturation begins around 6-7.
TREBLE
Controls high frequency response centered around 2Khz.
MID
Controls mid frequency response centered around 500hz.
BASS
Controls low frequency response centered around 60hz.
PRESENCE
Controls the high frequency response of the power amplifier. This
control is effective at frequencies higher than the treble control.
STANDBY SWITCH
Allow the amplifier 1 minute to warm up before engaging.
INDICATOR
Illuminates when power is applied.
POWER SWITCH
Turns the amplifier on and off. Make sure you are plugged into
a proper grounded outlet.
Advertisement
