Advertisement
REAR PANEL
FOOT SWITCH
Use any single button foot switch to turn on/off the effect.
REMOTE PEDAL
Connect the optional Magnatone remote pedal here.
Use any 1/4" mono or stereo guitar cable. When connected,
the front panel speed control is disabled. The remote pedal
works with both FM and AM settings.
FX SEND
Connect two buffer effects loop. Connect to the input of your
effects device. This loop is a low level loop, and works best with
effects pedals.
FX RETURN
Connect the output of your effects device here.
IMPEDANCE SELECTOR
Select the output impedance of the amplifier between 16, 8 and
4 Ohms. Always match the impedance with the speaker cabinet.
SPEAKER OUTPUTS
Plug into the speaker cabinet; always match impedance.
Do not operate without load or speaker connected.
COMPENSATED LINE OUT
Line level outputs. Speaker response compensated for DI use.
Always maintain a speaker load while using line output.
LAMP OUTPUT
Connect to optional lighted speaker cabinet.
AC INLET
Always plug into a grounded outlet of the correct voltage.
FUSE
3 amp sloblo, always replace with the same type and rating.
Advertisement
