Protecting The Environment; Service Information; Especificaciones; Troubleshooting - Black & Decker CS1024 Instruction Manual

listed in this manual) should be performed by authorized
service centers or other qualified service personnel, always
using identical replacement parts.
LUBRICATION
Black & Decker tools are properly lubricated at the factory
and are ready for use.

PROTECTING THE ENVIRONMENT

Separate collection. This product must not be
disposed of with normal household waste. Should
you find one day that your Black & Decker product
needs replacement, or if it is of no further use to
you, do not dispose of it with household waste.
Make this product available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.
Problem
 Unit will not start.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned and
authorized service locations. All Black & Decker Service
Centers are staffed with trained personnel to provide
customers with efficient and reliable power tool service. For
more information about our authorized service centers and
if you need technical advice, repair, or genuine factory
replacement parts, contact the Black & Decker location
nearest you, or visit us at www.BlackandDecker-la.com

ESPECIFICACIONES

Voltage
AR
B2C
B3
B2
BR
Power
No-Load Speed

TROUBLESHOOTING

Possible Cause
 Cord not plugged in.
 Circuit fuse is blown.
 Circuit breaker is tripped.
 Cord or switch is damaged.
220V ~ 50Hz
220V ~ 50Hz
120V ~ 50/60Hz
220V ~ 60Hz
127V ~ 60Hz
Possible Solution
 Plug tool into a working outlet.
 Replace circuit fuse. (If the product
repeatedly causes the circuit fuse
to blow, discontinue use immediately
and have it serviced at a Black &
Decker service center or authorized
servicer).
 Reset circuit breaker. (If the product
repeatedly causes the circuit breaker
to trip, discontinue use immediately
and have it serviced at a Black &
Decker service center or authorized
servicer).
 Have cord or switch replaced at
Black & Decker Service Center
or Authorized Servicer.
ENGLISH • 23
CS1024 CS1034
1500W 1700W
5500 rpm 5500 rpm