Cleaning And Care; Moving Your Beverage Cooler - Vinotemp VT-BC34 TS Owner's Manual

CLEANING AND CARE

Always unplug the beverage cooler before cleaning.
Do not use benzene, scrubbing brushes or chemical cleaners as these
will damage the unit.
Use only a mild, nonabrasive cleanser to clean the exterior of the
cabinet.
Clean the stainless steel door and handle by wiping with a warm water
and baking soda solution. The solution should be about 2 tablespoons
of baking soda to a quart of water.
Wash the racks with a mild detergent solution.
Always dry all parts with a clean dry cloth before plugging the
beverage cooler back into the receptacle.

MOVING YOUR BEVERAGE COOLER

Always unplug the beverage cooler before moving.
Always remove all beverage cans before moving the beverage cooler.
Securely tape down all loose items (shelves) inside your appliance.
Tape the door shut.
Be careful of cabinet legs to avoid damage when moving.
Be sure the beverage cooler stays in the upright position during
transportation
Protect the outside of appliance with a blanket or similar item when
moving as needed.
9
1 7 6 2 1 S o u t h S u s a n a R o a d , R a n c h o D o m i n g u e z , C a l i f o r n i a 9 0 2 2 1
i n f o @ v i n o t e m p . c o m