Using The Control Wheel - Sony DSC-RX100M3 How To Use Manual

3. Select your desired geographic location, and then press
4. Select a setting item using the up/down side of the control wheel or by turning the
control wheel, then press
5. Set [Daylight Savings] or [Daylight Svg.:], [Date/Time], and [Date Format:] using the
up/down/left/right sides, then press
Midnight is indicated as 12:00 AM, and noon as 12:00 PM.
6. Repeat steps 4 and 5 to set other items, then select [Enter] and press
To cancel the date and time setting procedure, press the MENU button.
Note
If the date and time setting is cancelled halfway, the setting screen for the date and time
appears every time you turn on the camera.
[17] How to Use

Using the control wheel

You can select setting items by turning or pressing the top/bottom/right/left side of the control
wheel. Your selection is determined when you press
The DISP (Display Setting),
Mode), (Flash Mode) functions are assigned to the top/bottom/left/right sides of the control
wheel. You can assign selected functions to the left/right sides of the control wheel or to the
in the center.
in the center.
Confirming the operation method
(Exposure Comp./Photo Creativity),
in the center.
Confirming the operation method
on the center of the control wheel.
.
in the center.
/ (Drive