Sony DSC-RX100M3 How To Use Manual page 132

Select [On], in which images are played back in a continuous loop, or [Off] (default setting), in
which the product exits the slideshow when all the images are played back once.
Interval:
Select the display interval for images from among [1 Sec], [3 Sec] (default setting), [5 Sec],
[10 Sec] or [30 Sec].
To quit the slideshow in the middle of playback
Press the MENU key to quit the slideshow. You cannot pause the slideshow.
Hint
You can activate a slideshow only when [View Mode] is set to [Date View] or [Folder
View(Still)].
[146] How to Use
Rotate
Rotates a recorded still image counter-clockwise.
1. MENU →
2. Press on the center of the control wheel.
The image is rotated counter-clockwise. The image rotates as you press
center. If you rotate the image once, the image remains rotated even after the product is
turned off.
Note
You cannot rotate the movies.
You may not be able to rotate images shot using other products.
When viewing rotated images on a computer, the images may be displayed in their
original orientation depending on the software.
[147] How to Use
Protect
Protects recorded images against accidental erasure. The
protected images.
Viewing Using viewing functions
(Playback) → [Rotate].
Viewing Using viewing functions
on the
mark is displayed on