Black & Decker BDI200 Instruction Manual page 22

THIS MANUAL CONTAINS IMPORTANT SAFETY AND OPERATING INSTRUCTIONS FOR THE 200
WATT POWER INVERTER MODEL BDI200.
WARNING: TO REDUCE THE RISK OF INJURY:
• Follow these instructions and those published by battery manfacturer and the manufacturer of
any equipment you intend to use with this unit. Review cautionary markings on these products
and on engine.
INTRODUCTION
Thank you for purchasing the BDI200 200 watt Power Inverter with USB Charging Port. This
inverter can be used to operate personal electronics such as: laptop computers, digital/video
cameras, MP3 players, cell phones, PDAs, and more. It can also be used to recharge AC devices
that have an appropriate recharging adapter with a standard plug. Please read this Instruction
Manual carefully before use to ensure optimum performance and to avoid damage to this product.
FEATURES
The front panel provides three LED indicators. The green LED indicates power and proper
operation of the inverter. The AC and USB outlets are ready to use. The red LED indicates inverter
shutdown from an over-load, Yellow LED lit fault indicates an input fault or over temperature. (If
the red or yellow Fault LED Indicator lights, refer to the Troubleshooting Section of this
Instruction Manual.)
The Power Pushbutton turns the inverter ON and OFF. It can also be used to force reset of inverter
circuits by pressing it OFF (no LEDs are lit), then back ON again. AC power is supplied through a
local standard outlet.
Controls and Functions
AIR VENT
NEGATIVE DC
POWER
CONNECTION
OUTPUT
FAULT
SAVE THESE INSTRUCTIONS
HIGH SPEED COOLING FAN
POWER
22
AC OUTLET
POSITIVE DC
POWER
CONNECTION
INPUT
FAULT
ON/OFF
PUSHBUTTON