Disarming The System; Arm Status Indication; Arming Tones; Full Arming - Electronics Line infiniti User Manual

3.3: Arm Status Indication

The system's arm status is displayed on the front
panel only. The following table explains the
various arm status descriptions that appear on
the LCD display.
This...
DISARMED
FULL ARMED
PART ARMED
PERIMETER ARMED

FULL ARMING

PART ARMING
PERIMETER ARMING
The system may be programmed to display arm status at all times or only for the first two
minutes after you arm or disarm the system.

3.4: Arming Tones

Arming tones are the chimes that the system
sounds during the entry/exit delay and when the
system arms or disarms. The system includes
various options that determine the pattern of
these tones.
Arming tones may be sounded by either the external siren or the control panel's built-in
internal siren.

3.2: Disarming the System

When you enter the premises, the entry delay begins
to count down. You must disarm the system within the
entry delay time to prevent the system from triggering
an alarm.
To disarm the system using the keypad:
•
Enter your user code.
To disarm the system using a keyfob:
•
Press the disarm button – see 2.3: Keyfobs..
Means...
The system is disarmed.
The system has been armed using the displayed arming method.
The system is in the process of arming (displayed during exit delay).
-9-
DISARMED
11:22:02
FULL ARMING
7 TO EXIT