Dixon ZTR 3000 SERIES Operator's Manual page 32

CARE AND MAINTENANCE
WHEELS AND TIRES:
Models ZTR 3303-ZTR 3304
Model ZTR 3014
ELECTRICAL SYSTEMS:
CLEANING THE MOWER:
MOWER DECK PLATES:
SERIAL NUMBERS:
WARRANTY:
PARTS/SERVICE:
PLEASE HELP PROTECT THE ENVIRONMENT BY AVOIDING ALL CHEMICALS WHICH
MAY DAMAGE OR CAUSE HARM TO PLANTS AND ANIMALS IN YOUR AREA.
Page 32
Correct tire pressure is important for correct operation of mower.
Front Tires 11 X 4.00-5 16-21 PSI
Rear Tires 16 X 650 X 8 8-14 PSI
Front Tires 11 X 4.00-5 16-21 PSI
Rear Tires 18 X 850 X 8 8-10 PSI
NOTE: Check lug nuts periodically for tightness.
Keep all connections clean and tight.
Wash mower periodically.
Clean above and below deck.
NOTE: Allow mower to cool before washing. If bearings are
hot, they will draw moisture inside as they dry and
cause corrosion.
Check periodically. Replace bolted-on wear plates before shaft
wears into mower deck plates. See illustration.
The serial number is located on frame at rear of engine, it
will begin with DM.
Refer to Warranty Registration Form (P/N 8288).
See your Dixon dealer for replacement parts, warranty or service.