Porter-Cable PCC510 Instruction Manual page 11

90582820 PCC510 18V OScillating Tool manual.qxd:??????-00 Cir Saw book
Remove excess wood from door jamb, window sill and/or toe kick. Removing excess
Cutting
copper or PVC pipe.
Carpets & backing, old tile adhesives, caulking on masonry, wood and other surfaces.
Scraping
Tile grout, plaster, mortar splatters, concrete on tiles, sills.
Grinding
before making any assembly, adjustments or
WARNING:
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
burns. Do not touch workpiece or blade
WARNING:
immediately after operating the tool. They
can become very hot. Handle carefully.
Always allow accessories and workpiece
to cool before handling.
Installing/Removing
The PCC510 features an exclusive tool-
Accessories
free accessory changing system. This
allows for faster accessory changes
without the need for wrenches or hex keys
like other oscillating tool systems.
• Grasp the tool and squeeze the
accessory clamping lever as shown in
figure 5.
• Clean any residual debris from the tool
shaft and the accessory holder.
• Slide the accessory between the shaft
and the accessory holder making sure
the accessory engages all eight pins on
the holder and is flush with the shaft
(figure 6).
• Release the accessory clamp lever.
ASSEMBLY
Remove battery from tool
Risk of lacerations or
5
6
11
12/13/11 9:12 AM