Panasonic Lumix DMC-ZS40 Operating Instructions Manual page 186

Wi-Fi/NFC
■
About the Wi-Fi connection lamp
■
About the [Wi-Fi] button
●
Before a Wi-Fi connection is established, press and hold the [Wi-Fi] button to display
the information (QR Code, SSID, password) you will need to connect the smartphone/
tablet directly to the camera.
●
Before a Wi-Fi connection is established, press the [Wi-Fi] button to perform the
following operations:
[New Connection]
[History Connection]
[Favorite Connection]
[Wi-Fi Setup] (→255)
●
Pressing the [Wi-Fi] button during a Wi-Fi connection enables the following operation.
When connected using [Remote Shooting & View], a guide explaining how to
terminate the Wi-Fi connection is displayed.
[Terminate the Connection]
[Change the Destination]
[Change Settings for Sending
*
Images]
[Register the Current Destination to
Favorite]
[Network Address]
*
This item will not be displayed if the destination for [Playback on TV] or [Send Images Stored in the
Camera] is set to [Printer].
Wi-Fi connection lamp
Lit blue: When the Wi-Fi function is ON
Blinking blue: When sending data
(→190)
(→190)
(→250)
(→250)
Terminates the Wi-Fi connection.
Terminates the Wi-Fi connection, and allows you to select
a different Wi-Fi connection.
For details (→254).
Registering the current connection destination or the
connection method, you can easily connect with the
same connection method next time.
Displays the MAC address and IP address of this unit.
(→256)
- 186 -
Wi-Fi ® Function and NFC Function
VQT5E94