Application (Record)
Changing the settings assigned to the
control ring/control dial
■
Recording mode:
Changes the settings assigned to the control ring/control dial.
Select [Ring/Dial Set] from [Setup] menu and press
[MENU/SET]
Use
to select [
press [MENU/SET]
Use
to select the setting and press [MENU/SET]
Control ring
[DEFLT] [Default Control]
[Exposure Comp.]
[White Balance]
[OFF] [Not Set]
■
When the settings assigned to both the control ring and control dial
have been changed
• Programme Shift cannot be used in [Program AE] Mode.
• The following operations can be performed from the Quick menu (→34):
- Aperture adjustment in [Aperture-Priority] mode
- Shutter speed adjustment in [Shutter-Priority] mode
- Aperture and shutter speed adjustment in [Manual Exposure] mode
●
The assigned function setting applies to all the Recording Modes.
However, the assigned function may not operate when combined with certain
Recording Mode.
●
Manual Focus can be performed from the Quick menu even if the control ring settings
have been changed.
(→60)
] (control ring) or [
Control dial
[Zoom]
(→80)
[Step Zoom]
(→83)
(→100)
[Aspect Ratio]
(→140)
[Sensitivity]
(→142)
(→144)
—
(→34)
• To return to the default setting,
select [Default Control].
• If you do not use the control ring,
select [Not Set].
- 134 -
] (control dial) and
(→33)
VQT5E94