Inserting The Battery - Panasonic Lumix DMC-ZS40 Operating Instructions Manual

Preparations

Inserting the battery

To charge the battery, insert it into the camera.
Slide the release lever to the
[OPEN] position and open the
card/battery door
Insert the battery all the way
• Insert the battery all the way firmly and
check that it is locked by lever.
Close the card/battery door and
then slide the release lever to
the [LOCK] position
■
To remove battery
Move the lever in the card/battery
compartment in the direction of the arrow.
●
Always use genuine Panasonic batteries.
●
If you use other batteries, we cannot guarantee the quality of this product.
●
Remove battery from camera after use.
• Keep the battery in a plastic bag, making sure that it is kept away from metallic objects (such as
clips) when carrying or storing it.
●
To remove the battery, turn the camera off and wait until the LUMIX indicator on
the screen goes off. (Failure to wait may cause the camera to malfunction and may
damage the card or recorded data.)
Make sure to insert the battery in
the correct orientation.
- 18 -
Charging battery
[OPEN] [LOCK]
Release lever
Lever
VQT5E94