Maintenance; Service Information; Troubleshooting; Specifications - Black & Decker CS1020 Linea PRO Instruction Manual

very best from your tool.
WARNING: The use of any accessory not recommended for use with this tool could be hazardous. Use only 7-1/4 "
(185mm) blades with 5/8" diameter arbor. Exception: 7" (175mm) abrasive blades can be used. When cutting metal, be
careful of hot sparks which are thrown by the blade.

MAINTENANCE

Your tool has been designed to operate over a long period of time with a minimum of maintenance. Continuous satisfactory
operation depends upon proper tool care and regular cleaning.
WARNING: Before performing any maintenance, switch off and unplug the tool.
• Regularly clean the ventilation slots in your tool using a soft brush or dry cloth.
• Regularly clean the motor housing using a damp cloth. Do not use any abrasive or solvent-based cleaner.
IMPORTANT: To assure product SAFETY and RELIABILITY, repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized service centers, always using identical replacement parts.
LUBRICATION
Black & Decker tools are properly lubricated at the factory and are ready for use.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your Black & Decker product needs replacement, or if it is of no further use to you,
do not dispose of it with household waste. Make this product available for separate collection.
Separate collection of used products and packaging allows materials to be recycled and used again.
Re-use of recycled materials helps prevent environmental pollution and reduces the demand for
raw materials. Local regulations may provide for separate collection of electrical products from the household,
at municipal waste sites or by the retailer when you purchase a new product.

SERVICE INFORMATION

Black & Decker offers a full network of company-owned and authorized service locations. All Black & Decker Service Centers
are staffed with trained personnel to provide customers with efficient and reliable power tool service. Whether you need
technical advice, repair, or genuine factory replacement parts, contact the Black & Decker location nearest you.
Problem
• • U U n n i i t t w w i i l l l l n n o o t t s s t t a a r r t t . .

SPECIFICATIONS

Voltage
AR 220V ~ 50Hz
B2C 220V ~ 60Hz
B3 120V ~ 60Hz

TROUBLESHOOTING

Possible Cause
• Cord not plugged in.
• Circuit fuse is blown.
• Circuit breaker is tripped.
• Cord or switch is damaged.
B2 220V ~ 50Hz
BR 127V ~ 60Hz
Power 1400W
No-Load Speed 5000 rpm
27
Possible Solution
• Plug tool into a working outlet.
• Replace circuit fuse. (If the product
repeatedly causes the circuit fuse
to blow, discontinue use immediately
and have it serviced at a Black & Decker
service center or authorized servicer.)
• Reset circuit breaker. (If the product
repeatedly causes the circuit breaker
to trip, discontinue use immediately
and have it serviced at a Black & Decker
service center or authorized servicer.)
• Have cord or switch replaced at
Black & Decker Service Center
or Authorized Servicer
ENGLISH