Maintenance; Specifications - Black & Decker CS1004-BR Instruction Manual

Wrench storage
The spanner wrench (14) can be stored on the saw shoe
as shown in (Fig. K).

MAINTENANCE

WARNING: Unplug tool before installing or removing
accessories, before adjusting, or when making repairs.
Use only mild soap and damp cloth to clean the tool. Never
let any liquid get inside the tool; never immerse any part of
the tool into a liquid.
Important! To assure product SAFETY and RELIABILITY,
repairs, maintenance and adjustment (other than those
listed in this manual) should be performed by authorized
service centers or other qualified service personnel,
always using identical replacement parts.
LUBRICATION
BLACK+DECKER tools are properly lubricated at the
factory and are ready for use.
ACCESORIOS
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
WARNING: The use of any accessory not
recommended for use with this tool could be hazardous.
Use only 7-1/4 " (184mm) blades with 5/8" diameter arbor.
PROTECTING THE ENVIRONMENT
Separate collection. This product must not be
disposed of with normal household waste.
Should you find one day that your
BLACK+DECKER product needs replacement,
or if it is of no further use to you, do not dispose
of it with household waste. Make this product
available for separate collection.
Separate collection of used products and packaging
allows materials to be recycled and used again.
Re-use of recycled materials helps prevent
environmental pollution and reduces the demand
for raw materials. Local regulations may provide for
separate collection of electrical products from the
household, at municipal waste sites or by the
retailer when you purchase a new product.

SPECIFICATIONS

Power
Disc diameter
Voltaje
AR, B2C
B3
B2
BR
No-load speed
Cable
Weight
Top Guard
Bottom Guard
Bevel Angle
Maximum Depth
ENGLISH • 27
CS1004
1400W
7-1/4" (184mm)
220V ~ 50Hz
120V ~ 60Hz
220V ~ 50/60Hz
127V ~ 60Hz
5300/min (rpm)
2m
3,6kg (7,9lb)
Aluminum
Aluminum
45°
62mm (2,4in)