Color List Key; Adjust Key; Auto Thread Tension Level; Cutting The Tails Of Jump Threads - ELNA Creative Series Instruction Book

r t

Color list key

Press the down arrow key q or up arrow key w to show
the next set of function keys.
Press the color list key e to view a list of thread colors
w
employed in the selected design.
e
q
Press the stitch number key r to view a number of
stitches for each color in the selected design.
Press the spool key t to view a list of thread colors
employed in the selected design.

Adjust key

Press the adjust key to open the manual setting window.
You can adjust the following settings in this window.
y Adjust key
y
u Auto thread tension level
Press the "+" or "–" key to adjust the thread tension to
your preference.
u
i Cutting the tails of jump threads
This option can be used when the "jump thread cutting
length" setting or "cutting command" is activated (refer to
i
page 59).
Press the "+" or "–" key to adjust the tail length of jump
thread.
33