Straight Stitches And Needle Position; Zigzag Stitches - ELNA Carina Instruction Manual

Straight stitches and needle position

00 01 02
0.0 2.0 3.5
0.5 1.0 2.0

Zigzag stitches

05 06 07
T
0.0 1.0 3.0
0.5 1.0 2.0
03 04
T
Changing the needle position
These setting apply only to patterns 00-04. The pre-set position is
"3.5", center position. When you press the " " stitch width
adjustment button, the needle position will move to the left.
When you press the "+" stitch width adjustment button, the
needle position will move to the right.
5.0 7.0
Changing the stitch length
To shorten the stitch length, press the " " stitch length
adjustment button. For a longer stitch length, press the "+" stitch
length adjustment button.
Generally speaking, the thicker the fabric, thread and needle, the
longer the stitch should be.
3.0 4.5
07
A
Adjusting the stitch width
The maximum zigzag stitch width for zigzag stitching is "7.0";
however, the width can be reduced on any patterns. The width
increases as you press the "+" stitch width adjustment button
from "0.0-7.0".
5.0 7.0
Adjusting the stitch length
The density of zigzag stitches increase as the setting of stitch
length approaches "0.3".
Neat zigzag stitches are usually achieved at "1.0-2.5".
Closed up zigzag stitches (close together) are referred to as a
satin stitch.
3.0 4.5
30
–
–