Bluetooth Operation - Polk Mono UM1 Installation And Operation Manual

BLUETOOTH OPERATION

The UM1 includes built-in Bluetooth technology that allows you to connect this head unit to
Bluetooth-enabled devices for streaming audio playback.
About Bluetooth Technology
Bluetooth wireless technology is a short-range wireless radio protocol. Operating in the 2.4
GHz range, it transmits voice and data at speeds up to 2.1 Mbit/s over a range of up to 10
meters.
Bluetooth Menu Options
NOTE: Please note that some BT menu options are only available while the unit is in
BT Audio mode
Press and hold the MENU button (6) to enter menu adjustment mode. Rotate the Encoder
Knob (5) to navigate the menu list to "Bluetooth Setup" and press the Encoder Knob to
access the following Bluetooth Menu options:

BT ON/OFF: Rotate the Encoder Knob to choose "BT ON" or "BT OFF", and then
press the Encoder Knob button to enter the selection.

BT DEVICE: Press the Encoder Knob button to view devices from the list. Rotate the
Encoder Knob to view a list of previously paired mobile devices. .Press the Encoder
Knob button to select the device. Rotate the Encoder Knob to choose Lock/Unlock,
Disconnect or Delete for this device. You cannot delete a device that is actively
connected.

BT PAIR: Rotate the Encoder Knob to choose "Pair?", then press the Encoder Knob
button to start pairing mode.

LOCK/UNLOCK: The UM1 can store up to 5 devices for BT connection. The devices
are stored in FIFO (First in First Out) order. To prevent a device from being bumped
from the list when more than 5 devices are used, you must lock the device. To
Lock/Unlock a device, press the Encoder Knob button to display/change the Locked
or Unlocked icon.

DISCONNECT: To disconnect a paired device, press the Encoder Knob button to
temporarily remove the BT link. The link can be re-established through your phone
menu by selecting the UM1 for connection.

DELETE: To delete a device from the list, press the Encoder Knob button.
Pairing a Bluetooth Device
Before you begin, consult the owner's manual for the Bluetooth device you want to pair with
the UM1.
1. Make sure the device is on and ready to receive a signal from the UM1. There are two
methods to pair a device; through the user menu or press and hold the Encoder Knob
while unit is in BT mode.
With the UM1 in BT Audio mode, choose BT PAIR from the UM1 menu and press the
Encoder Knob button to select ON. The unit is waiting to connect to a mobile device.
With the BT function of the mobile device turned on, search for a Bluetooth device.
2. When the Bluetooth device has completed its search, the mobile device will display the
Bluetooth device name (UM1).
3. Select UM1. The Bluetooth Audio icon will show on the LCD display.
4. Enter the pairing password (0000), if requested.
After connecting successfully, you are able to listen to music stored on your Bluetooth
enabled device through the radio.
Answering a Call
When answering a call using a connected phone, Bluetooth audio will pause. After hanging
up from the call, Bluetooth audio will continue on most devices. It may be necessary to press
the play button to resume playback.
21
UM1