Operation/Set-Up; Functional Description - Stanley FatMax FME365 Instruction Manual

F
G

Functional Description

A. Trigger Switch
B. Main Handle
C. Orbital Action Selector
D. Adjustable Shoe Button

oPERATIoN/SET-uP

WARNING:
CuT hAzARD. Turn off and disconnect tool from power source before
making any adjustments or removing or installing attachments or accessories.
WARNING:
Hold saw firmly with both hands for all cutting operations.
WARNING:
Inspect work area for hidden electrical wiring, gas pipes or water pipes
before making blind or plunge cuts. Failure to do so may result in electrical shock, fire,
explosion, or property damage.
WARNING:
CuT hAzARD. Blade breakage may occur if the blade does not extend
past the shoe and the workpiece during the cut. Increased risk of personal injury, as
well as damage to the shoe and workpiece may result.
WARNING:
AlWAYS use safety glasses. Everyday eyeglasses are NOT safety
glasses. Also use face or dust mask if cutting operation is dusty. ALWAYS WEAR
CERTIFIED SAFETY EQUIPMENT:
WARNING:
CuT hAzARD. Before cutting any type of material, be sure it is firmly
anchored or clamped to prevent slipping.
• Switch on saw motor before applying pressure.
• Place blade lightly against work to be cut.
WARNING:
CuT hAzARD. Never hold
and use the product with your fingers
wrapped around shoe adjustment
button. Always hold saw firmly with both
hands while cutting as shown in Figure 1.
Whenever possible, the saw shoe must be
held firmly against the material being cut.
This will prevent the saw from jumping or
vibrating and minimize blade breakage.
VARIABlE SPEED SWITCh (FIGuRE 2)
The variable speed trigger switch will give you added
versatility. The further the trigger is depressed the higher
the speed of the saw. To turn the tool "OFF" release the
trigger.
WARNING:
CuT hAzARD. This tool has no
provision to lock the switch in the ON position, and
should never be locked in the ON position by any other
means.
C
E
D
E. Secondary Gripping Handle
F. Blade Clamp
G. Adjustable Shoe
A
1
2
5
B