Operating With Projector Control - Sanyo PLC-XTC50L Owner's Manual

Basic Operation

Operating with Projector Control

Lens Operation
The following lens operation can be made with the Lens
button on the top control.
Press the Lens button to enter each lens operation mode.
The selected adjustment display appears on the screen.
Zoom Focus
Zoom Adjustment
Display "Zoom" on the screen. Use the Point
to zoom in and out the image.
Focus Adjustment
Display "Focus" on the screen. Use the Point
to adjust focus of the image.
Lens Shift Adjustment
Display "Lens shift" on the screen. Use the Point
buttons to position the screen to the desired point without
having picture distortion.
The screen can be moved up or down to 50 percent, or
sideways up to 15 percent from the central axis of the
lens shift.
Note:
Shutter Function
Shutter function allows you to completely block out light to
the screen. Press the SHUTTER button to close the shutter
inside the projector. To open up the shutter, press the
SHUTTER button again. Refer to p.56 for detail of setting for
the Shutter function.
Note:
28
Downloaded From projector-manual.com Sanyo Manuals
Lens Shift
Top Control
LENS
button
buttons
buttons
SHUTTER
button
MENU
button
POINT
buttons
ZOOM
FOCUS